Non-Ferrous
Copper and Copper Alloy,Lead Based Alloy Bronze, Gun metal, Brass, Nickel Bronze, Nickel Silver, Monel Metal and cupro Nickel Alloy To be Treated Cover Flux Deoxidising Tube Degassing Cake Alremover Al, SI, Bronze Sarubral 2/3 E1/E3 Gasex-1/2 Gun Metal Copper -1 Block / Copperex STD Powder BO (I) or Deoxidiser Gasex-1/2 Lead Bronze Leadal BO […]
Turbocast 9050 NS is a high performance, economical, water soluble release agent that is formulated for aluminum castings with a new “breed” of synthetic polymers, emulsifiers and water soluble additives. The product is blended into an economical, high performance release agent to produce clean, bright castings. Turbocast 9050 NS can also be used with zinc […]
Saru Z-21 is a revolutionary flux and has been especially formulated to reduce physically entrapped zinc and zinc oxide formation substantially in hot Dip galvanizing process. “SAZU” Z-21 flux melts at 194 ‘C (300’F) coats the liquid and then combines with the oxide particles assuring rapid reaction. Fumes and objectional smoke are minimized and the […]
P.D.C Diecoat 9000 (Series) Synthetic polymer, die release for pressure die-casting and squeeze-casting. Depending upon concentration and application suitable for all Alloy of Aluminum, Magnesium & Zinc Diecoat -535 For pressure die casting of thin section Aluminium Alloy Diecoat -40 Plunger lubricant for pressure die casting of Aluminium Diecoat -536 For pressure die casting of […]
Modifier-S Containing strontium in table & wire form, % ratio – 5%, 10% Strontium Operating Temp. is 700° – 800° C for modification of eutectic & Hypo eutectic Alloy of Aluminium. 0.5 – 1.0%
ATB Latest version Containing Titanium, Boron, in wire & tablet from in the ratio of Ti : B(5:1, 3:1, 5), for grain refinement of Aluminium and AL Alloy (Based on Technology from IIT, Kharagpur) 0.1 – 2% For Titanium Pick-up Al- Ti Master Alloy in Tablet & Rod Form in the ratio of A1 : […]
Atabletted product for the removal of small quantities (less than 1%) of unwanted Magnesium from Aluminium melt. Rate of Addition : 1% of charge weight for every 0.1% Magnesium to be removed.
A-129 Modifier for A1 – Si eutectic Alloy containing Silicon in the range of 10 to 13% for high Operating Temperature (790° – 800° C) 1.5% A-136 Modifier for A1- Si eutectic Alloy containing Silicon in the range of 10 to 13% for lower Operating Temperate (740° – 750° C) Upto 1.5% A-58 Modifier for […]
